How Foam Board Cutter Can Help Make Art

Polystyrene is something that is used everywhere. Starting from insulation to crafts, it is the most widely used lightweight material because of its tendency to resist water and ease of crafting. However, to ensure high degree of quality one needs a foam board cutter. This device shall ensure you get the best quality pieces from a large block of Styrofoam or sheet. Moreover, making bulletin boards, toys, models and sign posts from polystyrene is not possible without the use of tools.

Insulation is something that Styrofoam excels at. With hollow walls, it is hard to insulate the insides of a house because these walls cannot retain heat. Now, there are two methods to fix this problem and both use Styrofoam. First is to use a liquid polystyrene spray to lace the insides of hollow walls and the second is to manually place polystyrene blocks or sheets inside hollow spaces. To do the latter one has to make use of special crafting tools so as to shape large sheets according to the walls.

To graft polystyrene blocks there are three types of tools namely a utility knife, hot wire tool and a hot knife. All three are adept at cutting out large sheets into small pieces but only the hot wire tool offers a high degree of precision and accuracy. It uses a wire heated to high temperatures that then cuts through polystyrene sheets. A hot knife is similar to a hot wire tool but it uses a large surface to do the same. Finally, with a utility knife one can only manage to cut rough pieces.

Utility knives are multipurpose knives that can be used to perform various activities. They are different from the common kitchen knife and are usually provided with a thinner edge. Moreover, it is the cheapest available Styrofoam cutting tool in the market.

A hot wire iron manages to give smooth edges to a Styrofoam piece simply because polystyrene exhibits a natural tendency to melt under the slightest of heat. Thus, instead of cutting through a sheet of polystyrene, a hot wire iron simply glides through it melting any foam that comes in contact with it.

Hot knife is an excellent alternative to a hot wire iron. It uses the same principle of heating Styrofoam to cut it into manageable size or intricate shapes but it lacks the accuracy offered by a hot wire iron. This is because, the knife edges are thicker and have more surface area than that of a hot wire iron.

Before actually using any of the cutting devices, it is necessary to first draw an outline of the exact design that you shall be using. A marker or a sketch pen should suffice for this. Once the lines are etched, you can heat up the wire iron or a knife and slice through the Styrofoam.

For better Styrofoam designing, its best to use a foam board cutter. These are usually made as a hot wire iron and should reduce the work effort required for basic jobs. However, be very careful with them since they are dangerous tools that can cause bodily harm if dropped on the feet or if you touch the hot wire.

You can visit the website www.ezcuts.net for more helpful information about Relying On Foam Board Cutter For Better Precision

How Foam Board Cutter Can Help Make Art